0:01 Hey, everybody. Thanks for tuning in. You're listening to Home in Progress by Repco Light Paints, sponsored by Benjamin Moore. 0:08 And this week, I've got a couple of different topics that we're going to take. We're going to break the show into two parts. The last half of the show, I've got some random orbital sander tips. If you've ever used a random orbital sander, and most of us have, 0:24 If you've ever done that and you've looked at the surface that you've sanded and you've seen all these little, they look like pigtail swirls, you know, little swirls in the wood, little scratches in the wood. You see them when you stain it. If you've ever run into that, 0:37 I can tell you how to avoid that pretty much every time you use the sander. So we're going to get to that at the second half of the show. 0:44 But this first half, I want to go back and talk about an interview that I ran last week with Jean Stouffer and her daughter, Grace Start from Jean Stouffer Designs. 0:54 And in that interview, we covered a lot of info. 0:58 If you missed it, just go check out last week's episode. 1:00 We're not going to relive it here. We're just going to focus on one part of it. And there wasn't just one part of the conversation that was really intriguing to me. There was a lot that was intriguing. We covered everything from building a business to working together as 1:13 mother and daughter, raising families. We talked about that a little bit. Renovating older houses. We talked about their television show. 1:20 So a ton of interesting things were covered. But one particular conversation sent me down a rabbit hole. See, Jean was talking about how she got interested in kitchen design. 1:32 And she and her husband, she explained, had a kitchen that needed work. And this was before she was doing any of this on a big scale. She had her own kitchen and it needed work. And she went looking for ideas. And she found something in British magazines that 1:46 really grabbed her eye. Listen to how she describes that whole search. 1:51 So this was over 30 years ago. and it was just the beginning of the era of people thinking of the kitchen as a room that wasn't just utility where it could be a gathering space that was beautiful and I really wanted that for my home and I was 2:17 pursuing trying to understand what it could be beyond what American kitchens were at the point and I found what I was looking for when I found foreign magazines, particularly English or British kitchens. 2:31 They had better kitchens. 2:32 It was a different way of thinking about it. It was more of a gathering space. It was like a keeping room concept. It had furniture in it. There was a coziness to it and a beauty to it that we just had boxes screwed up on walls. You know, 2:52 and there was something there was something just, oh, like intriguing and and inviting about the whole thing. 3:00 Furniture, coziness, a gathering space. That's what stood out to her. 3:04 And she told us that she sat down at her drafting table with all of those magazines and with a magnifying glass. And she was trying to work out the details. 3:13 You know, what was making these kitchens feel so different? 3:17 And I wanted to know, too. So I started digging around. 3:21 ever since that interview, and I've been digging. And in the process of all of that digging, one of the British designers that I kept running into was a man named Johnny Gray. Now, Jean didn't say whose kitchens she was looking at. You know, that didn't come up in 3:36 the conversation. Just British, British kitchens. I can't say British. 3:41 Seems like I want to slur it. English kitchens. No, I can't say kitchens. Good heavens, you know what I'm talking about. She didn't say it was Gray's work that she was looking at, but his work was getting a ton of attention right around the time she was looking. 3:56 And his ideas line up remarkably well with what she described. 3:59 And so I ended up really digging into him and it was really interesting. You know, he was asking way bigger questions about the kitchen than a lot of people, you know, a lot of his contemporaries were asking at the time. He wasn't just looking at the kitchen and saying, 4:12 you know, where should the fridge go and where should the stove go? He was looking at the space and thinking and asking, what kind of life do the people living here want this room to make possible for them? 4:24 So those are big questions, really interesting questions. And so I've dug into that and I want to spend some time with him on the show here. Not him. No, man, someday, maybe. 4:35 But with his story, let's let's focus on this story and talk about his philosophy of kitchen design, because it marries really well. into what we covered last week. And there's a ton of practical stuff in here. All right. 4:47 Johnny Gray grew up in London in a big family. 4:51 His mother, she was always busy. You know, big family. 4:55 Moms are busy, right? And he said, if you wanted to find mom, the place to go looking was the kitchen. 5:01 And the kitchen in that particular home was a small, dark basement kitchen. Not a very fun place to go. 5:07 But that's where he went when he wanted to spend time with his mom. And while he was down there chatting it up, telling her what school was like, and probably talking about, you know, who knows what, while he's down there doing that, he usually ends up helping. He 5:20 remembers peeling potatoes as a little kid at the counter. 5:23 And he also remembers, you know, not just peeling the potatoes, but peeling them at a counter that was built for somebody a lot taller. You know, it wasn't a comfortable workspace. 5:32 That's important. It comes out later in his story. Anyway, so that was the first kitchen that he remembers as time goes by the family. ends up getting a cottage out in the country. And that kitchen at that place wasn't a whole lot better, you know, not a lot 5:48 more comfortable. He remembered hard wooden chairs, hardly any counter space, no heat, you know, not a great place, but still he and his brothers and his mom would sit in there for hours, reading, talking, working, all of that stuff. 6:02 And that part really gets me. I really liked that. 6:06 You know, nobody was gathering in that kitchen and because somebody had designed this amazing, spectacular room for gathering. You know, that kitchen had plenty working against it, a ton working against it. But it was where they found mom. You know, 6:19 it was where they talked. It was where family life was happening. And that stuck with him. You know, he kept thinking, if this room, you know, if this is the room that people are drawn to, the kitchen, if they're naturally drawn to it, what if design actually helped 6:33 You know, make that process better. You know, could people become more comfortable in a space like that? Could they pitch in more often? Could the room make spending time together easier if design actually got involved and tried to, 6:46 you know, actively help make that space better? So he's asking those questions, and those questions and the answers that he came up with led him to go take on something most of us would never even think twice about challenging or questioning, the way a kitchen is built. In 1980, 7:03 he wrote a piece for the Sunday Times in London with a title that pretty much says it all. Title was this. Why this awful fixation with fitted kitchens? You know, that tells you right where he stands. And he proposed 7:17 an alternative to fitted kitchens and he called them unfitted kitchens. Now, quick definition, probably got to cover some ground here. So we're all talking about the same thing. A fitted kitchen. 7:27 It's basically what most of us picture when we hear the word kitchen. Gene called it boxes on walls, built-in cabinets along the walls, counters running across the top of those lower cabinets and then upper cabinets above. Appliances, they're 7:42 all fitted into their slots and everything's coordinated into one system. 7:46 You know, that's a fitted kitchen. It's not a bad idea. 7:49 A lot of the thinking behind it is all about efficiency. 7:53 You know, good prep space, convenient storage, surfaces that are easy to clean. getting from the refrigerator to the sink to the stove without walking halfway across the house. Those things matter. Those are good things. If you've ever cooked 8:06 in a kitchen that fights you, you know how much those things matter. Gray wasn't throwing all of that out. 8:13 He wasn't tossing that away. He was just wanting to focus the same attention on everything else that happens in the room, not just the cooking and the food prep. 8:21 He said that in his mind, The kitchen may be the last place in the house where people really gather to talk. You know, think about it. Food is often one of the ways that we show affection for each other, you know, and it sets the rhythm of the day. 8:33 So a kitchen, it's really not just a place to make meals. It's where family life happens. And as a designer, Gray talks about how when people would describe their dream kitchens to them, you know, as they're getting ready to 8:45 design a kitchen, they would describe what they want, their dream kitchens. He said they almost never mention the cabinets. 8:51 They're talking about a table set by a window, you know, a view that they want or a setting that they want to create. They're talking about a fireplace that they want to bring in. Basically, he points out that their 9:01 strongest kitchen memories and their strongest kitchen ideas, you know, the things that they really want, it's all centered around conversations around the table, family gathering together. It's not focused primarily on the cabinets or the appliances. All of those 9:16 things are secondary. It's all about setting up the right space so they can entertain and just be with their family. 9:23 Our common fitted kitchens, they're built for storage and they're built for efficiency. They're not really built, at least primarily, to accommodate the gathering space idea that Gray was seeing as so integral to a good kitchen design. All right. 9:36 With all of that said, what does a Johnny Gray kitchen actually look like? We're going to get to that right after this. Home in Progress is brought to you by Repco Light Paints and Benjamin Moore. You know, people often think of paint as just another line item on 9:51 the project supply list. But here's the thing. Everything you do, every hour of prep, every stroke of the brush, all comes down to the quality of the paint. The paint is the pride. make sure it's the best and we're back you're listening to home in progress by repco light 10:04 paints sponsored by benjamin moore and we're talking about english kitchen designer johnny gray and his idea of the unfitted kitchen not the unfit kitchen or the kitchen for the unfit it's an unfitted kitchen And if you're just joining us, 10:19 here's the quick version. Last week, designer Jean Stouffer told us that she fell in love with British kitchens because they felt like real rooms. You know, they had furniture. 10:28 There was cozy, you know, just a cozy nature to them. 10:31 It was a place to gather. Gray is one of the people behind that way of thinking. Back in 1980, he challenged the standard fitted kitchen, you know, the one built with wall-to-wall cabinets. And he argued that the kitchen should be designed as much for the people in it 10:45 as for the cooking and all that that we do. 10:48 when we're in it. So before the break, I asked, what does it actually look like when Johnny Gray designs a kitchen? Well, it starts with furniture and furniture brings a few things into the room. First off, it's going to bring in the feeling that we already enjoy in 11:02 the rest of the house. You know, think about what makes your living room or your dining room or whatever, feel like yours, you know, feel like a space you want to kick back in and spend some time. What makes it feel that way? You know, a hutch that 11:14 was in your grandmother's house, a bookcase, A chair that you'd absolutely never, ever get rid of because you love that chair. You know, things with legs, things that you'd load into the truck if you moved. Different shapes, different woods, 11:26 a little bit of history to it. All of those things make our spaces throughout the home feel like ours and feel like places we want to be. Now, think about how many of those things are in your kitchen. 11:37 I'll give you a second. How many of those things are in your kitchen? For most of us, the answer is pretty low. You know, probably about zero. The kitchen is the one room in the house that we really don't make an active effort to furnish. We install the kitchen. 11:52 Bringing even one piece in can change the whole feel of the room. An old dresser holding the everyday dishes, a chair in the corner, you get the idea. That's a big part of what Jean was describing when she talked about the furniture and the coziness that she found 12:07 in English kitchens. It's a room that you want to settle in. Maybe it's even a room that invites you to settle in. Now, a second thing that furniture brings is flexibility. And I love this. This is such a great point. Cabinets get screwed to the wall, right? And 12:21 they stay put. Furniture, that stuff can move. It can change jobs. It can change rooms. It can come with you when you move. So when your kids grow up or the way you cook changes, the kitchen can change with it. You're not locked into a rigid design that 12:34 doesn't fit your present life. You've got options. Now, a third thing furniture brings is storage. You know, not more storage than a wall of built-in cabinets would give you. 12:43 but it's meant to give back what you gave up by leaving those cabinets out. So each piece of furniture gets a job. A dresser with open shelves that can hold, you know, everyday plates and glasses. A tall pantry cupboard can hold the food. A work table with drawers can 12:59 keep the pots and pans close to the stove. And the tools that you use every day, you know, they might hang right where you use them instead of getting buried in a drawer. So furniture is a big part of what makes a Johnny Gray home. design kitchen and 13:14 an English kitchen in general, like what Jean was talking about last week. Another thing that Gray designs around is conversation and specifically eye contact. Picture this, you know, somebody walking into the kitchen while you're making dinner. OK, they 13:28 start telling you about their day, all the ups and downs. 13:31 And oh, my goodness, you know, they never ask about your day. It's always tell them about, you know, tell you about their day. But as they're doing that, what are you doing? You know, you're facing the wall. You're working at the counter. So you turn around, right? You 13:43 say something and you turn back and keep chopping or whatever. 13:46 We have conversations like that all the time. We're used to them. But Gray asks a really simple question. Could the room be designed to make that easier? And even more importantly, could the design of the room make those 13:57 conversations better? Maintaining eye contact during a conversation, it's proven to have an impact on the quality of our interactions. 14:06 Making eye contact as we speak and as we listen, it builds trust. It increases a sense of emotional bonding with the other person, and it helps us manage the turn-taking when we're talking. We can see when someone understands 14:19 what we're saying, when they're getting ready to say something, or just when they need more time to process or think something through. So if design can increase the opportunities to make eye contact without taking us away from the work, well, 14:31 that's a huge win. So in his kitchens, whenever possible, Johnny Gray makes sure that the cook faces into the room, that work happens in the middle. on narrow islands or work tables, you know, not lined up along the walls. 14:45 And these islands that he generally designs, they're long and thin. 14:48 And there's a reason he does that. On a narrow island, two people working across from each other are close enough to actually talk, you know, face to face comfortably. Now, another important idea that's integral to making a good kitchen in his mind is making it a room that people 15:04 want to stay in. You know, in his philosophy, a kitchen should be comfortable enough that people linger and you know, and just want to hang out there. So a chair is crucial, a window seat, a spot in the sun, you know, even a sofa, if the room would allow, 15:17 you know, that's not off the table here. You know, that's something you could bring in if the space allows for it. Along these same lines of comfort, Gray also talks about something he calls soft geometry. You know, picture the corner of an island sticking out into a path 15:30 that you walk 50 times a day. Now picture that corner rounded off, making it easier to move around. So he uses curves to make those routes more comfortable. And he leaves some breathing room. Rather than treating every available 15:43 inch as a place for another cabinet or another chair or whatever, he allows breathing room. So you have somewhere comfortable to sit and enough room to move. And then there's the atmosphere around you. You know, while you're cooking 15:54 and cleaning up, you need good light to see what you're doing. But when the work's done, the lighting can change along with the activity, and that's desirable. You know, he calls that the evening kitchen. The bright overhead lighting can give way to a lamp or softer lights around 16:08 the places people are sitting. Think about your kitchen with every overhead light blazing. Now picture that same room with a soft glow around the table. You're sitting with somebody, finishing a cup of coffee, continuing a conversation. That softer 16:21 light is really going to help make that happen. All of that's about comfort. It's a big part of an unfitted kitchen. Another aspect of a great design kitchen is a kitchen made to fit the people using it. I love this. He calls that I love this because I'm 16:36 height challenged. You're going to understand in a second. He calls this idea humane ergonomics. Remember in the last segment, first segment that we had today, I mentioned that Gray's time spent peeling potatoes, you know, in his mom's old kitchen. 16:53 I told you that that was going to impact his design philosophy. You know, that was going to. show up later on in his thinking. Well, back then he remembered working at the table that was the wrong height for him and it made the work harder. It made it 17:04 less enjoyable. And so he brings a fix into his designs instead of just buying into the idea that there's one standard counter height for everybody. He thinks we should create work surfaces. Oh, this man is so brilliant. We should create work surfaces based on the elbow height of 17:20 whoever's actually doing the cooking. And to balance things out even more, he favors a few different heights in the room. 17:27 You know, a low table where, you know, a grandparent and a grandkid can sit and work together. Something at a counter height, you know, a normal counter height, the standard counter height for food prep, you know, for regular 17:39 sized people. You know, maybe a higher ledge where people can lean and talk or I can rest my chin on if I want to, you know, just rest that way. Anyway, in his mind, it's all about making the kitchen for the people who will be using it, not creating a 17:54 standardized space and then just having the people adjust to it. 17:57 I love that idea. Finally, last thing I've got. Gray wants your kitchen to look like somebody actually lives there. 18:04 And that means it's okay if things don't all match. 18:08 You know, before fitted kitchens came along, people put their kitchens together over time. A table here, you know, a cupboard there, a dresser that came from a grandparent, you know, trinkets and stuff that they collected and curated over years 18:21 and years. Gray wants to get back to that, you know, that lived-in look, you know, that eclectic in a way appearance. 18:29 You know, he thinks a kitchen done in one material, in one color, top to bottom, he thinks that's just dull. 18:34 I'm not saying it's dull. He thinks it's dull. And his argument is that a mix of colors and textures actually lifts your mood. Color, pattern, even a little bit of clutter, as long as it's stuff that you actually use, that's what makes it feel like a home. All right. 18:51 That's a lot of info. Next week, I want to make it more practical. We're going to talk about how to take his concepts and his ideas and apply them to our own kitchens without having to rip out all the cabinets or start some huge renovation. So that's next week. 19:05 But for right now, let's take a break. And when we come back, let's dig into random orbital Sanders and how to get perfect results every time. Home in Progress is brought to you by Repco Light Paints and Benjamin Moore. 19:16 Think about it. You spend hours prepping, sanding, taping, and then finally painting. Don't throw all that work away with an inferior product. The paint isn't just another supply. The paint is the project. Make sure it's the best. And 19:29 we're back. You're listening to Home in Progress by Repco Light Paints, sponsored by Benjamin Moore. And last time in our furniture refinishing series, probably two weeks ago, three weeks ago, something like that, Last time I was talking about furniture refinishing, 19:45 we talked about deciding or how to decide whether an old finish needs to come off at all. all. What I'm getting at is when I start furniture refinishing, when I get a chest of drawers or something like that, nine times out of 10, my gut inclination is that 20:02 I want to just get everything down to bare wood all the time. I always want to go that way, no matter what's on there, no matter what I'm going to do, you know, once I get it all off, you know, whatever my plan is. And the problem with that, 20:14 you know, the good thing about that is that you always get down to a really nice foundation and you can build on that in whichever direction you want to go. 20:22 You know, it's probably the ideal way to go in that regard. Uh, the downside to that is it's a ton of work, you know, watching videos, just experiencing it. 20:33 I don't have to talk about watching videos. I actually live life too. Um, experiencing it. I have spent hours and hours and hours sanding something, stripping something, when in fact I probably didn't need to do any of that. 20:45 You know, I could have just done a light scuff sanding and put my paint on. So we talked last time, whenever we talked about this last, we talked about how to know when it's worth it, when you should do it, and when you can just leave the piece. Well, for today, 20:59 let's say that you've got, you know, this piece and you've made the decision and you've got to get it down to bare wood. It's time for sanding. You know, I want to talk about all of that. And of course, before I talk about the sanding or anything like that, 21:12 I've got to make the big caveat that before you sand anything, you need to make sure that that coating that you're working on is not a lead-based coating. And you need to make sure that the coatings beneath that coating that you're working on, that they also... aren't lead-based. 21:28 So be safe, get a test kit and make sure. Now, once you know there's no lead-based paint, you can sand. 21:34 And yes, you could always chemically strip that old finish off. 21:38 And we'll talk about that later on in another week. 21:42 But today I want to talk about sanding instead. And don't tune out immediately because maybe you're not refinishing furniture and this seems like a throwaway for you. If you use a random orbital sander, this is gold. There's really, 21:55 really solid good stuff in this. So hang on, because a lot of us will use a random orbital sander for this project, you know, sanding a piece of furniture down, but also for all kinds of projects around the house. 22:07 You know, I've got a number of random orbital sanders, and they're the tools that I probably use most often around the house. I've had to replace them multiple times because I've just worn them out with use. And one of the things that I've encountered when I use them. 22:22 The one big issue, I love them 95% of the time, but there's one glaring problem that happens on pretty much every project I tackle with them is that these random orbital sanders leave behind these swirly little pigtail marks in 22:37 the wood, right? Little swirly pigtail marks. I know you must have seen them too. And if you haven't, go look at some of the things that you've sanded or sand a piece and then look at it really closely and you'll see them in And then you'll never unsee them. Anyway, 22:53 they show up in your stain. You know, you get the wood nice and sanded. You put stain on it and you see all these little swirls in it. They can even show up through your paint if you catch the right angles. I did some cabinet doors in my 23:04 kitchen once years and years back, spent forever sanding them to make them perfect and flawless and immaculate. And they looked great. They felt great. And when I got the primer on and the finish paint on, I thought they were great until I caught some angles on you know, 23:20 as I mounted them and hung them. And I noticed all these little swirls were still showing up to the paint. 23:26 It was a real bummer. You know, now after a couple of weeks, you don't see them anymore and it's kind of okay, but I knew they were there. And I know that it's not just me because working at the store at RepcoLite for years and years, you know, 23:37 helping people through stain projects or whatever, I'd get a number of calls or visits, you know, from people and they'd explain the same thing. You know, they sanded their doors down, And they stained them. And now they've got 23:48 these swirls everywhere. And they want to know how to get rid of them. And there's really no good way to get rid of them at that point. In fact, I eventually just concluded that the swirls were just part of what you have to deal with if you want 24:01 to use an orbital sander. And in some instances in the store, I just recommend people to hand sand stuff to avoid them. You know, I just figured you can't get away from these swirls when you're using an orbital sander. 24:12 So you got to either live with it or go another route. Anyway, blah, blah, blah. About three years ago or so, I ran into some info that really challenged and completely overturned my thinking on all of that. It turns out it's not really the Sanders fault. It's my fault. 24:28 I was using it incorrectly. And so were the people that I was talking to at RepcoLite all those years back. 24:34 And probably so are you, or at least a lot of you. We're using them wrong. And that's why we're getting these swirls. So anyway, if you know exactly what I'm talking about, there's really good news. You're probably using the tool wrong. And if you just get it switched around, 24:47 you'll be good to go and you'll get great results. 24:49 And it works. I've been using everything that I'm going to mention for the last, I don't know, three years or so. Results, 10 times better. I mean, it's night and day difference. Swirls, completely gone. Or at least 98% gone. 25:03 All right, here are the tips that you want to follow. 25:06 And I'm not really going to go in any specific order because I don't really think there is one. But the first thing to keep in mind that I want to talk about is to move through the sandpaper grits methodically. 25:16 You know, don't skip grits. When I sanded, I always had, you know, coarse paper, like a 60 grit, you know, discs like that. I had a medium paper, something like a 120 grit, and then I had a fine grit, you know, a 220. And that's how I would progress. 25:30 You know, if I needed the aggressive nature of the 60 grit on what I was sanding, I'd start there. Otherwise, I'd start with a 120, and then the very next one, I'd bump up the 220, and I'd call it good. 25:41 But that's not the right way to do it. It's not the best way to do it. You're going to get way better results if you don't skip grits. Because there are grits in between the two that I'm mentioning there. 25:51 There's a 150 grit. There's a 180 grit, for example. 25:53 And by working your way through them, you're going to get better results. You know, sandpaper smooths wood by scratching it, right? 25:59 Of course, not rocket science. A coarse grit is going to remove material quickly, right? It's going to leave relatively deep scratches in the wood. A finer grit removes those scratches quickly. and replaces them with shallower ones. So when 26:13 you go from a 120 straight to a 220, that very fine abrasive of the 220 has to remove every scratch left by the 120. Now, if you give it enough time and you really work it, it might, you know, it probably will, but it's going to take longer than 26:27 you expect. And it's easy to do the work and end up with a surface that feels, you know, beautifully smooth while some of those deeper, you know, deeper scratch marks still remain. And then they end up showing up when you stain or paint the piece. So that's why 26:41 the best practice is to work through the grits instead of making a big jump. So 120, then to 150, then to 180, then to 220. When you do it that way, each one has a smaller job to do. 26:51 That alone is going to help you a ton. So keep that in mind. And really quickly here, just a brief explanation of the numbers, you know, sandpaper numbers, lower numbers are coarser. If you're not aware, 80 grit, for example, is going to be more aggressive and coarser than a 27:06 120 grit. A 120 grit is going to be more aggressive than a 180 grit. Basically, the higher the number goes, the finer the scratch it leaves behind. All right. So don't skip grits. Work your way up through each one. 27:20 That means you're probably going to have to buy extra discs. 27:23 Just buy the extra discs. It's going to be worth it. 27:25 It's going to make that sander 10 times more valuable to you because you're going to get better results. 27:30 All right. 27:31 Next thing I want to talk about is the way you move the sander, because the way we move it across the piece is another surprisingly easy way to create the swirls. Now, if you want to avoid them, there's a few simple things that you need to do as 27:43 you're using the sander on the piece of wood, and we're going to cover all of them right after this. 27:49 You're listening to Home in Progress, where the projects are real, the mistakes, they're educational, sometimes painful, mostly educational, and the only thing more stubborn than that old wallpaper on your bathroom wall is your determination to get it fixed. proudly 28:05 sponsored by Repco Light Paints and Benjamin Moore. Paint with a purpose, people who care, and everything you need to get the job done right. And we're back. You're listening to Home in Progress by Repco Light Paints, sponsored by 28:16 Benjamin Moore. And we're talking about orbital sanders and how to use them, some tips and tricks to using them that will completely eliminate the little pigtail swirls that maybe you've noticed in the wood that you've sanded with your 28:29 orbital sander. If you haven't noticed it before, look at some pieces that you've sanded. You're not going to thank me later, but when you see those little swirls in there, you're going to know exactly what I'm talking about because 28:39 chances are they're there. But you can eliminate them by using the sander in the right way. A lot of us use them, just little things, do little things wrong, but we use them in the wrong way, and that's how we get these swirls in the wood. We talked 28:52 about a few things last time, but what I started to get into at the end of last segment is that it's all about, or a big part of it, is how you move the sander across the surface. that you're sanding. That's a really easy way to get the 29:06 swirls by doing that wrong. Now, most of the time when I did it, when I was sanding something, see if this relates to you or if you relate to this. 29:14 When I was sanding a piece, I would ream down on the sander and move it across the surface back and forth really fast. I knew it was sanding because it was gently spinning, right? But I figured that by moving it quickly back and forth over the surface and 29:28 putting a lot of pressure on it, almost like it's a sanding block. I was doing double duty. It's like a sanding block that's also spinning. It just, it still makes sense in my brain, but don't do that. No matter how much sense it makes, don't do that. That's 29:42 a recipe for a load of swirls, a boatload of swirls, not the good kind of swirls like in ice cream. 29:49 This is bad swirls. You don't want them. So don't do that. Instead, let the sander do the work. This is the most counterintuitive part of what I want to say. 29:57 It's really important though. your hand is mainly there to guide the sander. That's it. If you're pressing hard enough to slow the motor or to keep the pad from spinning freely, you've got to back off. I thought that's when I was really getting into it. No, completely messed up. 30:11 You're just lightly guiding it. You know, extra pressure is going to interfere with the way the sander is designed to move, and it can cause the swirls that we're trying to avoid. So light pressure. And here's another counterintuitive tip. 30:23 At least for me, it's counterintuitive. You've got to go slowly. 30:27 And I know that's a little bit vague, but here's a good rule of thumb that I ran into that really changed it for me. Move about one inch per second, one inch per second. That's what you're trying to do. 30:37 Imagine taking roughly 12 seconds to move across a one foot section. Now you don't have to be exact. You don't need a timer for any of this. Just make sure the sander gets time to work as it travels. 30:47 So don't lean on the sander. So there's tons of pressure and don't zip it across the wood. Let it work. 30:54 You know, let it move its way slowly across the surface. 30:56 at about an inch per second and keep moving in orderly overlapping passes. Finally, at least in terms of how you move the sander across the surface, keep the sander flat. 31:07 And I am guilty of this almost all the time. 31:10 You know, I see a mark somewhere on the piece and I'm trying to get at it. And if I'm not getting it instantly, what I do is I tip the sander a little bit so that one side of the disc, you know, the front of the disc is 31:20 actually attacking that. My idea is that I'm concentrating all of the pressure into a much smaller area. But the problem is that I can easily, of course, dig a hollow into the wood. I can round over an edge that I want to crisp or I can leave a 31:34 new scratch that stands out when I stain. It's not the right way to do it. You want to make sure you keep the pad flat at all times. Don't tilt it up. Keep it flat at all times. If an area needs more work, give it more appropriate work. 31:47 And that might mean going back a grid, you know, and sanding the whole section evenly. It might mean working a detail by hand. It generally doesn't mean leaning the sander over and drilling away at one spot. That's a bad way to go. All right, so keep it flat. 32:00 Here's another rule of thumb that's useful. Start on, stop off. 32:04 It's basic, but I bet a number of us mess this up often. At least I used to. I'm not proud of what I'm going to explain because it makes me sound so dumb. And maybe I am. I don't know. 32:16 I guess I can live with that. I should have known better. I know that. But what I would do, I had a lot of fun doing this. I like to infuse fun into even the most mundane jobs. And I found this to be incredibly fun. I would turn 32:28 the sander on and I would really let it get humming, you know, really spinning. It's in the air. It's spinning. 32:34 I'm trying to hang on to it. My arm's shaking because it's rotating so fast. It feels like I've got the power of Thor in my hand. You know, that's what I would do. And then finally, I'd get it going fast enough and I'd bring it down on the surface. 32:47 And I was so excited because the minute it hits that surface, whatever it is, pieces and chunks of that old finish just go flying in all directions just for a split second, but it's really fun, really exciting. So I did that. And then when it was time to stop, 33:02 I would power the thing off and then I'd press it down really hard on the surface to stop the disc. 33:08 And I know, like I said, when I say that, there should be no surprise in anybody's mind, in my mind, it should be no surprise that there were scratches in the wood that I was working on. You know, no surprise. 33:18 I get it. And I am exaggerating a little bit for fun, but Sadly, not as much as I wish I was exaggerating. But you know what I'm saying, or at least you can probably imagine it. Anyway, all of that, of course, is wrong. Any version of that is wrong. Instead, 33:33 set the sander flat on the surface, and that's when you turn it on. When it's on the surface already, turn it on, keep it flat on the surface, turn it on. When you're done, of course, lift it off from the surface before you switch it off. Super simple, 33:45 but it helps you avoid bringing a freely spinning disc down onto a surface at an angle where it might grab or skip. and it also keeps you from stopping the pad in one place on the wood and gouging it. 33:56 All right, with that said, some newer sanders, they do have a pad break that makes an off-surface start less troublesome. 34:03 You check the instructions for your equipment, but for most of us, start on, stop off, easy way to remember how to place and lift the tool deliberately. Now, let's talk about something that can undo good technique, and it's 34:16 what's under the disc. As you're sanding, you make dust, right? 34:20 The old finish may also clog the abrasive and an occasional loose particle can get trapped between the disc and the wood. And instead of making a consistent fine scratch pattern, that particle may drag around and carve a more obvious mark. 34:33 And that's largely what all those swirls are that we see. 34:37 And this is one reason why dust collection matters so much, you know, for the end results. It's not just for keeping the workshop or whatever clean. It's for getting good results on your, you know, the piece of wood that 34:47 you're sanding. So use your sander's collection system, you know, your dust collection system, whatever it is. Make sure you're using it to the best of its ability. Or, you know, better yet, connect an appropriate vacuum, like a shop vac, 34:59 if you can. Most sanders will allow this. You know, you can pop off that little bag that collects the dust, and most of them have an attachment right there for shop vacs. If you can do that, that's going to be great. That's going to help a ton in so 35:13 many different ways. That will help a ton, but it will really reduce dust. the scratches and the swirls that you may be getting in the wood. And also one other thing here, when you're changing grits, vacuum the wood surface off. You want to make sure that you've got 35:26 all the dust and the particles off before you move on to the next grit. All right. What about the parts that a round sander can't reach? We all run into that from time to time. Of course, don't try to make it do those jobs. Either get a sanding 35:40 block and hand sand those areas or look for a finishing sander. Finishing sanders have square or rectangular heads, and they can handle corners and things like that more easily. 35:50 Be aware that those are out there. And if you're talking like contoured pieces that you're trying to sand, trim or something like that, something with a contour, don't count on pretty much any electric or battery-powered sander to do 36:03 that work without some adjustment to it. A foam sanding block is maybe your best friend in that situation. That's going to shape itself and follow a curved edge much more easily. But, you know, with that said, there are, you know, a number of sanders out there that have 36:20 foam interface pads. You have to look them up if you don't know what I'm talking about. But basically, you know, a sander has this head that's a Velcro backer, and then we can put our sanding disc on that. A number of sanders, you can buy these foam pads that 36:35 are maybe half an inch thick. It's just a soft foam. 36:38 It's like a sanding pad. But it attaches to that Velcro, you know, that deck on your sander. And then you put your sanding pad on this foam piece. It holds it in place. And now it can move around and adjust to curves and contoured edges a little bit better. 36:52 So look into those foam interfaces if you, you know, do a lot of sanding with contoured pieces. Look into that. Now, following all of those things are really going to help you get great results with an orbital sander. If you've ever struggled, that will help you a ton. But for 37:08 a stained piece, if you've got something that you really want the best look for, you really still can't beat a light final hand sanding on the flat areas. Using the final grit that you used on your orbital sander, go at all the flat areas with the grain, just 37:23 do a nice hand sanding. The power sander's already done the heavy lifting, done the heavy work. This is just a chance to tidy up faint orbital marks and just get that final perfect look on the piece. Now, last thing, 37:35 before you stain or paint anything, inspect what you've actually done. 37:39 You know, make sure that you're done. Make sure you've done the work to the level that you want to do. 37:43 And a really, really easy way to do this is to take a work light and put it down low and shine it across the wood rather than straight at it. 37:51 You know, shine it across the wood and then walk around the piece and change your viewing angle. A swirl that you can't see, you know, under direct lighting, under ceiling lights or something is is most likely going to become obvious when light skims across the surface. Now, if 38:04 you find one, fix it now. It's way easier to fix now than discovering it after you've put on stain, paint, or varnish, or any of those things. And if you do refinish furniture regularly, a professional machine is probably a 38:19 really worthwhile investment. You know, better dust collection, balance, lower vibration, and a good abrasive system. All of those things can make long sanding sessions way easier to manage, to tolerate, to deal with. And that's where a brand like Festool 38:34 enters the conversation. It's not inexpensive, but if you do this on a regular basis, it's going to pay for itself. 38:40 If you're interested in looking at that as an option, RepcoLite's a Festool dealer. So just swing out to any RepcoLite location, start the conversation. They don't all have the tools on hand, but they can get you the info 38:52 that you need and at least start that conversation. All right, random orbital sanders. I know that was a lot of info, you know, a lot to take in. But these are tools that get used all the time. I think for DIYers, it's probably one of your top three or four go-to tools. 39:06 And knowing some of these tips that will help you get great results, it's really going to pay off down the road. If you need to revisit them or want to check them out again, just head to repcolite.com and click the Home in Progress tab right on the homepage, 39:19 the podcast tab on the homepage. You can find this episode and it's all in the show notes. All right, that's going to do it for this week. If you want to catch this episode again, like I said, you can find it online at repcolite.com. also find it wherever 39:31 you get your podcasts. Just search for Home in Progress and you can subscribe and you'll never miss an episode. 39:38 And that's big stuff. You're going to be pretty excited when Saturday's episode rolls out Thursday. two days early. You'll know what I'm going to be talking about on the radio two days ahead of everybody else if you subscribe to the podcast. So Home in Progress, wherever you get 39:52 your podcasts, check it out. Whatever you do today, make sure Paint's a part of it. Have a great weekend, everybody, and I'll see you next week. For Home in Progress by Repco Light Paints, I'm Dan Hanson. Thanks for listening. 40:12 Thank you.
Community discussion