This Episodes Questions: Brians Questions: Love the podcast fellas! I have a simple question: When I use my table saw, I usually just check if the blade is "high enough" i.e. any height higher than the wood piece. Is there an ideal blade height for a given wood thickness? Thanks! Matt What is the most difficult project you've ever done? Brian Guys Questions: I’m wondering how thick is too thick to veneer onto a plywood box. I’ll be making a treasure chest for my daughter’s wedding (for cards and such) and lining it in leather. I have some wood I’d like to use for the outside as “veneer”, but it is a 3/8” thick. The species is morado, and they were a “special buy” thing at a Woodcraft I got a while ago. Basically, I have them and I’d like to use them if possible rather than buying something else. My bandsaw isn’t always the most reliable, so while I would feel comfortable splitting them and then planing them flat again, that might be as thin as I’m able to do. I’m guessing 1/8” thick once all the processing is done. Is that too thick to use as veneer? Is there a glue that’s better for a thicker veneer than a thin one? Thanks, Peter I recently bought a small bandsaw mill (Woodmizer LX30) and am becoming an amateur sawyer, exclusively to supply lumber for my own projects. 2 questions, here's the first: 1. In what use cases, if any, would you use air-dried lumber for your projects, assuming it is stickered properly, outside, with a rain cover on the top, for a year per inch of thickness? I was told by a friend who operates a kiln that air-drying in southern Indiana will never get the moisture content much below 13-15%, it will dry unevenly throughout the board, and it won't kill powder post beetles and other insects. His conclusion is that for any indoor woodwork projects, I should only use kiln-dried lumber. Do you agree? Why or why not? Fortunately, he's well-respected, trustworthy, and at $.35/bd-ft dried, affordable. But I can air-dry for free, so I'd be curious to know when, if ever, that may be workable. Kyle Huy's Questions: I have another good fundamentals of woodworking type question for you. Could you explain the differences between grain density and porosity? For a while I thought I knew what at least one of these meant. That was until I heard Guy describe oak as a tight-grained, open pore species. That whole description goes more or less right over my head. I'd really appreciate it if you guys could explain what grain density and wood porosity look like visually, as well as what effects these attributes have on working with a particular species, finishing it, etc. Thanks for all of your time and for sharing your expertise with all of us. The Fridays when you guys have new episodes are my favorite days of the week. Zach Hello Friends, I have a woodshop at my house in the PNW. I’m somewhere between a beginner and not a beginner. If you want to answer this question on your fantastic podcast, you can of course skip the preamble. I offer it here so you can understand the context and environment in which my question lives. Because we are friends, I care what you think, so I hope you don’t arrive at the conclusion that I’m impractical. I’ve tried to create a shop environment that incorporates a whimsical and creative aesthetic because that is how I aspire to be in this space. I built an entry door and carriage doors for my 500sq foot detached woodshop. Doors guts are constructed from poplar frames, 1.5” ridged insulation in the voids, MDO skin on the exterior side trimmed in the craftsman style with ¾ cedar. The interior side of the doors are skinned in plywood and laminated with orange counter top material. The orange is the same color as those orange shirts people who work hard wear. I like to wear these shirts to give my wife the impression that I too am working and not just fudging around. I wanted my workshop to feel likewise. Door window sills and trim are walnut. On the entry door, I’ve installed a commercial style stainless steel handset modified for a 3” thick door. Carriage doors are hung with 4 heavy duty sealed ball bearing hinges per side. For the carriage doors, I had custom astragals and a threshold plate fabricated at a local metalworking shop, and used stainless steel cane bolts that plunge through the threshold plate to hold the doors tight against the weather seals and another set of cane bolts at the top to complete the seal. The carriage door handles are two of my favorite axes. I designed mounting hardware, built by the fabricator, with a quick release pin system so I can pull them off when I need them for axe related business. Inside the shop, I’ve installed antique reclaimed maple flooring on the walls. The flooring was recovered from a factory that used to make steam powered tractors for hauling giant old growth redwood trees out of the forests on the west coast in the late 1800’s. It seemed like a fitting retirement for these floors. I didn’t resurface the flooring (which is now w
